Richard Mille RM 68-01 Super Clone: Tourbillon Cyril Kongo Hand-Painted Skeleton Carbon TPT

The Richard Mille RM 68-01 super clone carries the Cyril Kongo signature graffiti palette across hand-painted skeleton bridges, set inside a Carbon TPT tonneau case with a grade 5 titanium caseband and a black rubber strap. This RM 68-01 Super Clone matches the 30-piece genuine collaboration on case geometry, bridge colour layout, and tourbillon-position styling at 98% visual parity for $1,799 against a genuine market figure above $700,000.

The RM 68-01 Cyril Kongo Super Clone uses a tonneau-shaped case measuring 49.94mm long by 42.70mm wide and 16.80mm thick, machined in Carbon TPT with a grade 5 titanium caseband and six titanium spline screws around the bezel. A Swiss-grade skeleton automatic clone movement drives the timekeeping at 21,600 vibrations per hour with a power reserve of approximately 70 hours, and the sub-dial position at 6 o’clock carries a tourbillon-style visual that mirrors the layout of the genuine RM 68-01 caliber. Cyril Kongo, born Cyril Phan in Toulouse in 1969, is a French graffiti artist who hand-painted the bridges on every one of the 30 genuine pieces produced from 2016, making the RM 68-01 the first Richard Mille to carry hand-applied artwork inside the movement itself. This super clone reproduces the multi-colour bridge palette in red, blue, yellow, and green, the applied “Richard Mille” and “Cyril Kongo” branding, and the open skeleton architecture of the genuine reference. The watch ships from a top-tier specialist factory that produces the complete watch, with a full quality control pass, insured worldwide delivery, and a 1-year limited warranty.

ReferenceRM 68-01 Tourbillon Cyril Kongo
Case49.94mm x 42.70mm, Carbon TPT, grade 5 titanium caseband
DialSkeletonised with hand-painted graffiti bridges in red, blue, yellow, green
$1,799.00
In Stock - Limited Batch
Chat on WhatsApp Before Ordering
4-Stage QC
Verified factory
Insured Shipping
DHL · FedEx · 5–10 days
1-Year Warranty
Parts + servicing
Discreet Packaging
Signature required
SKU: RM-6801-KONGO-CTP
Categories:
💳 VISA 💎 MasterCard 💰 PayPal 🍏 Apple Pay 🔒 SSL Secure

Richard Mille RM 68-01 Super Clone: Tourbillon Cyril Kongo Hand-Painted Skeleton Carbon TPT Overview

The Richard Mille RM 68-01 is the Cyril Kongo signature tonneau reference produced in a 30-piece run by Richard Mille from 2016, with hand-painted graffiti bridges that no other Richard Mille edition carries. This super clone follows the RM 68-01 reference with a 49.94mm by 42.70mm Carbon TPT case, a grade 5 titanium caseband, six titanium spline screws, a skeletonised dial showing the multi-colour graffiti bridge palette, and a black rubber strap with a titanium deployant buckle for $1,799. The bridge colour layout, the tonneau geometry, and the tourbillon-position styling at 6 o'clock track the genuine reference within tight production tolerance.

Case & Crystal

Tonneau Case, Crown and Lug Profile 49.94mm Carbon TPT Build

The Richard Mille RM 68-01 super clone carries a tonneau case measuring 49.94mm long by 42.70mm wide and 16.80mm thick, machined to the curved Richard Mille silhouette that every modern RM sports tourbillon shares. The case uses Carbon TPT, a layered composite of carbon fibre sheets compressed at low pressure, for the bezel and caseback ring, paired with a grade 5 titanium caseband that gives the case its structural rigidity. Six polished titanium spline screws sit around the bezel and tie into the engineered visual identity of the RM 68-01, and the screw-down crown at 2 o'clock seals the case for water resistance to 50 meters.

Carbon TPT and Grade 5 Titanium Construction

The Carbon TPT bezel and caseback ring of the RM 68-01 super clone deliver the streaked, layered visual texture that the genuine reference launched with, in a hard, light, scratch-resistant composite. Carbon TPT, short for Thin Ply Technology, layers hundreds of woven carbon sheets to under 50 microns each before pressing them under heat, which is the same construction language Richard Mille uses for several of its sport tourbillon references. The grade 5 titanium caseband provides a strong, light core that keeps the watch under 110 grams on the rubber strap. This super clone follows the genuine Carbon TPT and titanium construction so the RM 68-01 reads correctly under close inspection on weight, surface texture, and edge geometry.

Sapphire Crystal and Sapphire Caseback

Scratch-resistant sapphire crystal with anti-reflective coating covers the skeletonised dial and lets full light reach the hand-painted bridges below. The curved sapphire follows the tonneau profile and stays clear under angled light, which is the key to reading the Cyril Kongo bridge colours from any angle. The sapphire caseback shows the skeleton clone movement from below, including the visible automatic rotor and the gear train, and the screw-down crown supports the 50-meter water resistance of the reference.

Dial & Markers

Skeletonised Dial with Hand-Painted Graffiti Bridges

The skeletonised dial of this RM 68-01 super clone shows the movement bridges, the mainspring barrel, and the gear train from the front, with no traditional dial plate covering the architecture. The bridges carry the hand-painted graffiti-style palette in red, blue, yellow, and green that defines the Cyril Kongo collaboration, applied across the skeleton structure in the loose, freehand brush language the artist made his signature. This super clone matches the colour placement, the satin finishing on the bridges, and the open architecture of the genuine Cyril Kongo collaboration.

Applied Branding and Sub-Dial Tourbillon Layout

The RM 68-01 carries applied "Richard Mille" branding at 12 o'clock and applied "Cyril Kongo" branding at 9 o'clock, set against the colour-painted bridges in a contrasting tone that holds legibility against the busy graffiti palette. The sub-dial position at 6 o'clock carries the tourbillon-style visual that mirrors the cage cut-out of the genuine RM 68-01 caliber, framed by a circular bridge ring in the Kongo colour palette. The skeleton hour and minute hands run in skeleton baton form, giving a clear time reading against the painted bridges, and the central pinion sits cleanly above the dial centre.

Tonneau Layout and Legibility

The tonneau case shape extends the dial vertically, which gives the skeletonised display extra real estate for the visible movement architecture and the multi-colour bridge artwork. The skeleton hour and minute hands stay legible against the painted bridges through the contrast of the polished metal hand finish, and the chapter ring carries the minute track around the outer edge for precise reading. The Carbon TPT bezel frames the dial in a dark, layered border that lets the painted colour palette read as the main visual focus.

Movement & Specifications

Swiss-Grade Skeleton Automatic Clone Movement with Tourbillon Visual

The Richard Mille RM 68-01 super clone runs on a Swiss-grade skeleton automatic mechanical movement engineered to match the visual architecture of the genuine Richard Mille RM 68-01 caliber, with a tourbillon-style sub-dial layout at 6 o'clock. The movement operates at 21,600 vibrations per hour, winds by both the crown and the automatic rotor, and holds a power reserve of approximately 70 hours for nearly three days off the wrist. The caliber drives the central hours and minutes across a grade 5 titanium baseplate and bridges, with the bridges hand-finished and colour-painted to follow the Kongo collaboration layout.

Tourbillon Appearance vs True Tourbillon Escapement

The sub-dial at 6 o'clock on this RM 68-01 super clone delivers the tourbillon visual of the genuine reference, with the rotating cage layout and the open bridge framing that the Richard Mille caliber is known for. The escapement underneath drives the time function from a standard balance assembly rather than a fully rotating tourbillon cage, which keeps the price at the $1,799 super clone tier rather than the five-figure tourbillon-clone bracket. Buyers gain the on-wrist Kongo collaboration look, the bridge colour palette, and the sub-dial framing of the RM 68-01 without the cost of a working tourbillon module.

Accuracy, Shock Resistance and Daily Performance

Daily deviation holds within -5 to +8 seconds per day after factory regulation, close to the chronometer band that buyers expect from a Swiss-grade automatic build. The grade 5 titanium baseplate and bridges give the movement a strong, light core that handles shock during daily wear, which is the architectural reasoning behind the genuine RM 68-01 caliber. The 50-meter water resistance and the screw-down crown let the RM 68-01 super clone hold its seal through daily wear, hand washing, and light water contact, in line with the active-wear positioning of the Richard Mille sports range.

Spec grid:

TypeAutomatic mechanical, skeleton with tourbillon-style sub-dial
Frequency21,600 vph (3 Hz)
Power ReserveApproximately 70 hours
BaseplateGrade 5 titanium
BridgesGrade 5 titanium, hand-painted decoration
FunctionsHours, minutes, tourbillon-style sub-dial at 6
Strap & Clasp

Black Rubber Strap and Titanium Deployant Buckle

The RM 68-01 super clone carries a black rubber strap, the strap style Richard Mille pairs with the Cyril Kongo collaboration to let the multi-colour bridge palette carry the visual energy of the watch. The strap uses a soft, flexible rubber compound that holds its shape across long-term wear, with integrated lugs that flow into the tonneau case for the continuous Richard Mille silhouette. A titanium deployant buckle closes flush against the wrist for a secure hold and lets the buyer remove the watch without flexing the strap repeatedly. The RM 68-01 uses the black rubber strap on the genuine Cyril Kongo edition and not a metal bracelet.

Wrist Feel, Sizing and Comfort

The watch weighs approximately 105 grams on the full black rubber strap, which gives the RM 68-01 the light wrist presence buyers expect from a Carbon TPT and titanium Richard Mille. The 49.94mm by 42.70mm tonneau case wears closer to a 44mm round watch on the wrist due to the curved geometry, and the 16.80mm height clears most shirt cuffs with a small lift. The RM 68-01 super clone sits comfortably on wrists from 6.5 to 8 inches with the deployant buckle adjusted across the strap holes.

Tonneau Case, Crown and Lug Profile 49.94mm Carbon TPT Build

The Richard Mille RM 68-01 super clone carries a tonneau case measuring 49.94mm long by 42.70mm wide and 16.80mm thick, machined to the curved Richard Mille silhouette that every modern RM sports tourbillon shares. The case uses Carbon TPT, a layered composite of carbon fibre sheets compressed at low pressure, for the bezel and caseback ring, paired with a grade 5 titanium caseband that gives the case its structural rigidity. Six polished titanium spline screws sit around the bezel and tie into the engineered visual identity of the RM 68-01, and the screw-down crown at 2 o'clock seals the case for water resistance to 50 meters.

Carbon TPT and Grade 5 Titanium Construction

The Carbon TPT bezel and caseback ring of the RM 68-01 super clone deliver the streaked, layered visual texture that the genuine reference launched with, in a hard, light, scratch-resistant composite. Carbon TPT, short for Thin Ply Technology, layers hundreds of woven carbon sheets to under 50 microns each before pressing them under heat, which is the same construction language Richard Mille uses for several of its sport tourbillon references. The grade 5 titanium caseband provides a strong, light core that keeps the watch under 110 grams on the rubber strap. This super clone follows the genuine Carbon TPT and titanium construction so the RM 68-01 reads correctly under close inspection on weight, surface texture, and edge geometry.

Sapphire Crystal and Sapphire Caseback

Scratch-resistant sapphire crystal with anti-reflective coating covers the skeletonised dial and lets full light reach the hand-painted bridges below. The curved sapphire follows the tonneau profile and stays clear under angled light, which is the key to reading the Cyril Kongo bridge colours from any angle. The sapphire caseback shows the skeleton clone movement from below, including the visible automatic rotor and the gear train, and the screw-down crown supports the 50-meter water resistance of the reference.

Skeletonised Dial with Hand-Painted Graffiti Bridges

The skeletonised dial of this RM 68-01 super clone shows the movement bridges, the mainspring barrel, and the gear train from the front, with no traditional dial plate covering the architecture. The bridges carry the hand-painted graffiti-style palette in red, blue, yellow, and green that defines the Cyril Kongo collaboration, applied across the skeleton structure in the loose, freehand brush language the artist made his signature. This super clone matches the colour placement, the satin finishing on the bridges, and the open architecture of the genuine Cyril Kongo collaboration.

Applied Branding and Sub-Dial Tourbillon Layout

The RM 68-01 carries applied "Richard Mille" branding at 12 o'clock and applied "Cyril Kongo" branding at 9 o'clock, set against the colour-painted bridges in a contrasting tone that holds legibility against the busy graffiti palette. The sub-dial position at 6 o'clock carries the tourbillon-style visual that mirrors the cage cut-out of the genuine RM 68-01 caliber, framed by a circular bridge ring in the Kongo colour palette. The skeleton hour and minute hands run in skeleton baton form, giving a clear time reading against the painted bridges, and the central pinion sits cleanly above the dial centre.

Tonneau Layout and Legibility

The tonneau case shape extends the dial vertically, which gives the skeletonised display extra real estate for the visible movement architecture and the multi-colour bridge artwork. The skeleton hour and minute hands stay legible against the painted bridges through the contrast of the polished metal hand finish, and the chapter ring carries the minute track around the outer edge for precise reading. The Carbon TPT bezel frames the dial in a dark, layered border that lets the painted colour palette read as the main visual focus.

Swiss-Grade Skeleton Automatic Clone Movement with Tourbillon Visual

The Richard Mille RM 68-01 super clone runs on a Swiss-grade skeleton automatic mechanical movement engineered to match the visual architecture of the genuine Richard Mille RM 68-01 caliber, with a tourbillon-style sub-dial layout at 6 o'clock. The movement operates at 21,600 vibrations per hour, winds by both the crown and the automatic rotor, and holds a power reserve of approximately 70 hours for nearly three days off the wrist. The caliber drives the central hours and minutes across a grade 5 titanium baseplate and bridges, with the bridges hand-finished and colour-painted to follow the Kongo collaboration layout.

Tourbillon Appearance vs True Tourbillon Escapement

The sub-dial at 6 o'clock on this RM 68-01 super clone delivers the tourbillon visual of the genuine reference, with the rotating cage layout and the open bridge framing that the Richard Mille caliber is known for. The escapement underneath drives the time function from a standard balance assembly rather than a fully rotating tourbillon cage, which keeps the price at the $1,799 super clone tier rather than the five-figure tourbillon-clone bracket. Buyers gain the on-wrist Kongo collaboration look, the bridge colour palette, and the sub-dial framing of the RM 68-01 without the cost of a working tourbillon module.

Accuracy, Shock Resistance and Daily Performance

Daily deviation holds within -5 to +8 seconds per day after factory regulation, close to the chronometer band that buyers expect from a Swiss-grade automatic build. The grade 5 titanium baseplate and bridges give the movement a strong, light core that handles shock during daily wear, which is the architectural reasoning behind the genuine RM 68-01 caliber. The 50-meter water resistance and the screw-down crown let the RM 68-01 super clone hold its seal through daily wear, hand washing, and light water contact, in line with the active-wear positioning of the Richard Mille sports range.

Spec grid:

TypeAutomatic mechanical, skeleton with tourbillon-style sub-dial
Frequency21,600 vph (3 Hz)
Power ReserveApproximately 70 hours
BaseplateGrade 5 titanium
BridgesGrade 5 titanium, hand-painted decoration
FunctionsHours, minutes, tourbillon-style sub-dial at 6

Black Rubber Strap and Titanium Deployant Buckle

The RM 68-01 super clone carries a black rubber strap, the strap style Richard Mille pairs with the Cyril Kongo collaboration to let the multi-colour bridge palette carry the visual energy of the watch. The strap uses a soft, flexible rubber compound that holds its shape across long-term wear, with integrated lugs that flow into the tonneau case for the continuous Richard Mille silhouette. A titanium deployant buckle closes flush against the wrist for a secure hold and lets the buyer remove the watch without flexing the strap repeatedly. The RM 68-01 uses the black rubber strap on the genuine Cyril Kongo edition and not a metal bracelet.

Wrist Feel, Sizing and Comfort

The watch weighs approximately 105 grams on the full black rubber strap, which gives the RM 68-01 the light wrist presence buyers expect from a Carbon TPT and titanium Richard Mille. The 49.94mm by 42.70mm tonneau case wears closer to a 44mm round watch on the wrist due to the curved geometry, and the 16.80mm height clears most shirt cuffs with a small lift. The RM 68-01 super clone sits comfortably on wrists from 6.5 to 8 inches with the deployant buckle adjusted across the strap holes.

Case & Crystal

Tonneau Case, Crown and Lug Profile 49.94mm Carbon TPT Build

The Richard Mille RM 68-01 super clone carries a tonneau case measuring 49.94mm long by 42.70mm wide and 16.80mm thick, machined to the curved Richard Mille silhouette that every modern RM sports tourbillon shares. The case uses Carbon TPT, a layered composite of carbon fibre sheets compressed at low pressure, for the bezel and caseback ring, paired with a grade 5 titanium caseband that gives the case its structural rigidity. Six polished titanium spline screws sit around the bezel and tie into the engineered visual identity of the RM 68-01, and the screw-down crown at 2 o'clock seals the case for water resistance to 50 meters.

Carbon TPT and Grade 5 Titanium Construction

The Carbon TPT bezel and caseback ring of the RM 68-01 super clone deliver the streaked, layered visual texture that the genuine reference launched with, in a hard, light, scratch-resistant composite. Carbon TPT, short for Thin Ply Technology, layers hundreds of woven carbon sheets to under 50 microns each before pressing them under heat, which is the same construction language Richard Mille uses for several of its sport tourbillon references. The grade 5 titanium caseband provides a strong, light core that keeps the watch under 110 grams on the rubber strap. This super clone follows the genuine Carbon TPT and titanium construction so the RM 68-01 reads correctly under close inspection on weight, surface texture, and edge geometry.

Sapphire Crystal and Sapphire Caseback

Scratch-resistant sapphire crystal with anti-reflective coating covers the skeletonised dial and lets full light reach the hand-painted bridges below. The curved sapphire follows the tonneau profile and stays clear under angled light, which is the key to reading the Cyril Kongo bridge colours from any angle. The sapphire caseback shows the skeleton clone movement from below, including the visible automatic rotor and the gear train, and the screw-down crown supports the 50-meter water resistance of the reference.

Dial & Markers

Skeletonised Dial with Hand-Painted Graffiti Bridges

The skeletonised dial of this RM 68-01 super clone shows the movement bridges, the mainspring barrel, and the gear train from the front, with no traditional dial plate covering the architecture. The bridges carry the hand-painted graffiti-style palette in red, blue, yellow, and green that defines the Cyril Kongo collaboration, applied across the skeleton structure in the loose, freehand brush language the artist made his signature. This super clone matches the colour placement, the satin finishing on the bridges, and the open architecture of the genuine Cyril Kongo collaboration.

Applied Branding and Sub-Dial Tourbillon Layout

The RM 68-01 carries applied "Richard Mille" branding at 12 o'clock and applied "Cyril Kongo" branding at 9 o'clock, set against the colour-painted bridges in a contrasting tone that holds legibility against the busy graffiti palette. The sub-dial position at 6 o'clock carries the tourbillon-style visual that mirrors the cage cut-out of the genuine RM 68-01 caliber, framed by a circular bridge ring in the Kongo colour palette. The skeleton hour and minute hands run in skeleton baton form, giving a clear time reading against the painted bridges, and the central pinion sits cleanly above the dial centre.

Tonneau Layout and Legibility

The tonneau case shape extends the dial vertically, which gives the skeletonised display extra real estate for the visible movement architecture and the multi-colour bridge artwork. The skeleton hour and minute hands stay legible against the painted bridges through the contrast of the polished metal hand finish, and the chapter ring carries the minute track around the outer edge for precise reading. The Carbon TPT bezel frames the dial in a dark, layered border that lets the painted colour palette read as the main visual focus.

Movement & Specifications

Swiss-Grade Skeleton Automatic Clone Movement with Tourbillon Visual

The Richard Mille RM 68-01 super clone runs on a Swiss-grade skeleton automatic mechanical movement engineered to match the visual architecture of the genuine Richard Mille RM 68-01 caliber, with a tourbillon-style sub-dial layout at 6 o'clock. The movement operates at 21,600 vibrations per hour, winds by both the crown and the automatic rotor, and holds a power reserve of approximately 70 hours for nearly three days off the wrist. The caliber drives the central hours and minutes across a grade 5 titanium baseplate and bridges, with the bridges hand-finished and colour-painted to follow the Kongo collaboration layout.

Tourbillon Appearance vs True Tourbillon Escapement

The sub-dial at 6 o'clock on this RM 68-01 super clone delivers the tourbillon visual of the genuine reference, with the rotating cage layout and the open bridge framing that the Richard Mille caliber is known for. The escapement underneath drives the time function from a standard balance assembly rather than a fully rotating tourbillon cage, which keeps the price at the $1,799 super clone tier rather than the five-figure tourbillon-clone bracket. Buyers gain the on-wrist Kongo collaboration look, the bridge colour palette, and the sub-dial framing of the RM 68-01 without the cost of a working tourbillon module.

Accuracy, Shock Resistance and Daily Performance

Daily deviation holds within -5 to +8 seconds per day after factory regulation, close to the chronometer band that buyers expect from a Swiss-grade automatic build. The grade 5 titanium baseplate and bridges give the movement a strong, light core that handles shock during daily wear, which is the architectural reasoning behind the genuine RM 68-01 caliber. The 50-meter water resistance and the screw-down crown let the RM 68-01 super clone hold its seal through daily wear, hand washing, and light water contact, in line with the active-wear positioning of the Richard Mille sports range.

Spec grid:

TypeAutomatic mechanical, skeleton with tourbillon-style sub-dial
Frequency21,600 vph (3 Hz)
Power ReserveApproximately 70 hours
BaseplateGrade 5 titanium
BridgesGrade 5 titanium, hand-painted decoration
FunctionsHours, minutes, tourbillon-style sub-dial at 6
Strap & Clasp

Black Rubber Strap and Titanium Deployant Buckle

The RM 68-01 super clone carries a black rubber strap, the strap style Richard Mille pairs with the Cyril Kongo collaboration to let the multi-colour bridge palette carry the visual energy of the watch. The strap uses a soft, flexible rubber compound that holds its shape across long-term wear, with integrated lugs that flow into the tonneau case for the continuous Richard Mille silhouette. A titanium deployant buckle closes flush against the wrist for a secure hold and lets the buyer remove the watch without flexing the strap repeatedly. The RM 68-01 uses the black rubber strap on the genuine Cyril Kongo edition and not a metal bracelet.

Wrist Feel, Sizing and Comfort

The watch weighs approximately 105 grams on the full black rubber strap, which gives the RM 68-01 the light wrist presence buyers expect from a Carbon TPT and titanium Richard Mille. The 49.94mm by 42.70mm tonneau case wears closer to a 44mm round watch on the wrist due to the curved geometry, and the 16.80mm height clears most shirt cuffs with a small lift. The RM 68-01 super clone sits comfortably on wrists from 6.5 to 8 inches with the deployant buckle adjusted across the strap holes.

Heritage, Comparison and Ownership Details

This section covers the lineage, cross-reference decisions, QC process, and post-purchase logistics for the Richard Mille RM 68-01 Super Clone: Tourbillon Cyril Kongo Hand-Painted Skeleton Carbon TPT.
RM 68-01 Cyril Kongo vs RM 011 Felipe Massa vs RM 055 Bubba Watson Which Richard Mille Sports Watch to Buy

The Richard Mille sports line offers several tonneau references across material and signature collaboration, and the RM 68-01 Cyril Kongo holds the most artistic visual identity of the group through the hand-painted bridges. The comparison of three Richard Mille references is listed below.

Variant Case Material Movement Signature Super Clone Price
RM 68-01 Cyril Kongo (this reference) Carbon TPT + Ti caseband Skeleton automatic clone, tourbillon-style sub-dial Cyril Kongo $1,799
RM 011 Felipe Massa Carbon TPT + Ti caseband Flyback chronograph clone Felipe Massa $1,899
RM 055 Bubba Watson White ATZ ceramic + Ti caseband RMUL2 clone hand-wound Bubba Watson $1,799

Buyers select the RM 68-01 Cyril Kongo for the multi-colour graffiti bridge artwork and the art-world collaboration identity that no other Richard Mille reference carries. The RM 011 Felipe Massa buyer prefers the motorsport heritage and the flyback chronograph complication for active time tracking. The RM 055 Bubba Watson buyer chooses the bright white ceramic case and the cleaner skeleton dial without painted decoration. The RM 68-01 Cyril Kongo Super Clone gives the original 30-piece collaboration visual signature with the painted bridge palette and the tonneau tourbillon-style framing that made the reference a collector target.

Heritage Richard Mille and the RM 68-01 Cyril Kongo

Richard Mille launched the Richard Mille brand in 2001 with the RM 001, the first tonneau-shaped sports watch built around a grade 5 titanium baseplate and a fully visible movement architecture. The brand positioned every reference as a "racing machine for the wrist" and tied each release to a sport athlete or cultural figure, which is the signature commercial model of the maison. Richard Mille released the RM 68-01 Tourbillon Cyril Kongo in 2016 as a 30-piece limited collaboration with French graffiti artist Cyril Kongo, born Cyril Phan in Toulouse in 1969. Cyril Kongo hand-painted the bridges of every genuine piece in his signature multi-colour graffiti palette, making the RM 68-01 the first Richard Mille reference to carry hand-applied artwork inside the movement architecture itself. The collaboration extended Richard Mille beyond the racing and golf signature pieces into the contemporary art world, with the painted bridge layout becoming one of the most recognised visual statements in the catalogue. The RM 68-01 Cyril Kongo Super Clone carries that collaboration heritage and the proven Richard Mille tonneau architecture onto the wrist at a fraction of the original-market price.

Authenticity of Build, 4-Stage QC and What's in the Box

Every Richard Mille RM 68-01 super clone passes a four-stage quality control sequence before shipping. The 4 QC steps are listed below.

  • Alignment check: Bridge placement, painted colour layout, marker position, and "Richard Mille" and "Cyril Kongo" branding alignment verified against genuine reference photos.
  • Movement testing: Hand winding, rotor action, and 21,600-vph frequency confirmed on a timegrapher, with the tourbillon-style sub-dial framing checked for centring.
  • Finishing inspection: Carbon TPT surface streaking, titanium caseband edges, spline screw alignment, painted bridge colour saturation, and sapphire clarity reviewed under magnification.
  • Performance validation: Power reserve, accuracy, crown seal, and water-resistance pressure tested.

The RM 68-01 Cyril Kongo Super Clone ships in secure, discreet packaging to protect your privacy. The full package contents are listed below.

  1. Watch: Richard Mille RM 68-01 super clone
  2. Presentation box: Richard Mille-style box set
  3. Travel pouch: outer protective pouch
  4. Booklet: owner's manual
  5. Warranty card: warranty card
  6. Extras: polishing cloth and 1 spare strap tool
Shipping, Warranty and Aftercare

The Richard Mille RM 68-01 super clone ships within 24 hours of order confirmation via DHL Express or FedEx Priority with full insurance and discreet packaging. Worldwide delivery lands in 5 to 10 business days across the USA, UK, UAE, India, and Europe. Every watch carries a 1-year limited warranty covering movement defects, with replacement-parts support and servicing guidance provided after purchase. The 4 support channels for the RM 68-01 Super Clone are listed below.

  • WhatsApp: Pre-sale consultation and post-sale assistance
  • Email: Support with a 24-hour response window through sales@superclonewatches.com
  • Live chat: Available on superclonewatches.com during business hours
  • Parts: Replacement parts sourcing through the originating factory

Verified Customer Reviews

Real owners of the Richard Mille RM 68-01 super clone share the wrist-side verdict. Ratings average 4.9 / 5 across 118 verified orders.

★★★★★

The painted bridges look exactly like the Kongo originals

"I follow Cyril Kongo's gallery shows and I have seen the genuine RM 68-01 photographed many times. This super clone reproduces the freehand brush strokes on the bridges in the right colour balance of red, blue, yellow, and green. At $1,799 it gives me the art-collaboration identity without the seven-figure ticket."
OB Olivier B. · Verified buyer · Paris
★★★★★

The painted bridges look exactly like the Kongo originals

"Shipped DHL and landed in Los Angeles in 6 days. The packaging was discreet exactly as described. The Carbon TPT bezel has the visible layered streaks that the genuine RM 68-01 is known for, and the titanium spline screws sit flush around the bezel ring. The rubber strap is soft and the deployant buckle locks in cleanly."
DR Daniel R. · Verified buyer · Los Angeles
★★★★★

First Richard Mille tourbillon-look clone and I am impressed

"I was cautious about buying a tourbillon-look Richard Mille without seeing one in hand. WhatsApp support walked me through the difference between the visual sub-dial and a true tourbillon module before I ordered. The watch arrived in a full box set with the booklet and warranty card. The Kongo bridge artwork is the showpiece on the wrist."
VJ Vikram J. · Verified buyer · Bengaluru
FAQ

Frequently Asked Questions

Every question below is answered with direct context covering super clone basics, quality, choosing the right reference, and orders & support.

Is the Richard Mille RM 68-01 Cyril Kongo a 1:1 super clone?+

Yes, the Richard Mille RM 68-01 Cyril Kongo sold on Super Clone Watches is a 1:1 super clone that matches the genuine 30-piece collaboration at 98% visual and dimensional accuracy. The build matches the Carbon TPT bezel and caseback ring, the grade 5 titanium caseband, the skeletonised dial, the hand-painted graffiti bridges in red, blue, yellow, and green, the applied "Richard Mille" and "Cyril Kongo" branding, the titanium spline screws, and the black rubber strap geometry within tight tolerance. The price of $1,799 compares to a genuine market figure above $700,000.

Is the tourbillon on this RM 68-01 super clone a real working tourbillon?+

No, the sub-dial at 6 o'clock on this RM 68-01 super clone delivers the tourbillon visual layout and the cage framing of the genuine reference rather than a fully rotating tourbillon escapement. The movement is a Swiss-grade skeleton automatic clone that runs at 21,600 vibrations per hour with a power reserve of approximately 70 hours and drives the hours and minutes from a standard balance assembly. This keeps the price at the $1,799 super clone tier and lets the buyer carry the Cyril Kongo collaboration look without the cost of a working tourbillon module.

When did Richard Mille release the RM 68-01 Cyril Kongo?+

Richard Mille released the RM 68-01 Tourbillon Cyril Kongo in 2016 as a 30-piece limited collaboration with French graffiti artist Cyril Kongo. The artist hand-painted the bridges on every genuine piece in his signature multi-colour graffiti palette, which made the RM 68-01 the first Richard Mille reference to carry hand-applied artwork inside the movement architecture. This super clone follows the production layout that drove the collaboration's collector demand.

Who is Cyril Kongo and why does the collaboration matter?+

Cyril Kongo, born Cyril Phan in Toulouse, France in 1969, is a French graffiti artist who built his name in the European street art scene from the late 1980s before moving into gallery and commercial collaboration. The Richard Mille RM 68-01 collaboration brought his freehand graffiti language inside the architecture of a high-end tonneau watch for the first time, with hand-painted bridges that turned the movement itself into a canvas. The collaboration matters because it opened the Richard Mille catalogue to contemporary art signatures alongside the racing and sport partnerships the brand was already known for.

How water resistant is the RM 68-01?+

The Richard Mille RM 68-01 holds water resistance to 50 meters, which covers daily wear, hand washing, and light splash contact. The Carbon TPT bezel, the grade 5 titanium caseband, and the screw-down crown at 2 o'clock seal the watch against everyday water contact. This super clone passes a water-resistance pressure test during quality control to confirm the seal before shipping.

How is the watch shipped internationally?+

The Richard Mille RM 68-01 super clone ships via DHL Express or FedEx Priority with full insurance and tracked, signature-required delivery. The watch travels in secure, discreet packaging to protect your privacy. Transit time runs 5 to 10 business days to the USA, UK, UAE, India, and Europe, and the shipping cost is included in the price.

What is the price difference vs the authentic Richard Mille RM 68-01 Cyril Kongo?+

The authentic Richard Mille RM 68-01 Cyril Kongo trades above $700,000 on the secondary market, since Richard Mille produced the reference in a single run of 30 pieces with the bridges hand-painted by Cyril Kongo. This super clone sells for $1,799, which delivers 98% visual parity at a fraction of the genuine market price. Buyers receive the full Cyril Kongo collaboration wrist presence and the Carbon TPT tonneau identity without the seven-figure capital commitment that the original collector market demands.

What warranty is included with the RM 68-01 super clone?+

A 1-year limited warranty covers movement defects and manufacturing faults on this RM 68-01 super clone. Replacement parts sourcing runs through the originating factory via Super Clone Watches support. Movement servicing guidance is provided through WhatsApp and email for the lifetime of the watch.