Richard Mille RM 018 Super Clone : Tourbillon Hommage à Boucheron Steel Skeleton Dial

The Richard Mille RM 018 super clone features the stainless steel tonneau case of the Tourbillon Hommage à Boucheron limited edition paired with a skeletonised dial showing yellow accents and applied hard-stone hour markers, finished to 98% visual and dimensional parity with the genuine reference. This RM 018 Super Clone carries a hand-wound mechanical skeleton movement engineered to resemble the RM 018 tourbillon architecture, priced at $1,799 against a genuine market figure above $400,000 for the original 30-piece Boucheron run.

This stainless steel Richard Mille Super Clone uses a tonneau-shaped case measuring 48mm long by 39.70mm wide and 13mm thick, secured by six steel spline screws around the bezel. A Swiss-grade clone of the RM 018 hand-wound mechanical skeleton movement drives the timekeeping at 21,600 vibrations per hour with a power reserve of approximately 48 hours. Richard Mille released the RM 018 Tourbillon Hommage à Boucheron in 2011 as a 30-piece collaboration with the French jeweller Boucheron, founded on the Place Vendôme in 1858, and the reference used eight different hard-stone variants across the limited run with applied gemstone hour markers. This super clone matches the case proportions, the bridge layout, the yellow-accent skeleton dial details, and the applied hard-stone markers of the Boucheron production. The watch ships from a top-tier specialist factory that produces the complete watch, with a full quality control pass, insured worldwide delivery, and a 1-year limited warranty.

ReferenceRM 018 Tourbillon Hommage à Boucheron
Case48mm x 39.70mm, stainless steel tonneau with 6 spline screws
DialSkeletonised with yellow accents and applied hard-stone markers
$1,799.00
In Stock - Limited Batch
Chat on WhatsApp Before Ordering
4-Stage QC
Verified factory
Insured Shipping
DHL · FedEx · 5–10 days
1-Year Warranty
Parts + servicing
Discreet Packaging
Signature required
SKU: RM-018-HOMM-BCH
Categories:
💳 VISA 💎 MasterCard 💰 PayPal 🍏 Apple Pay 🔒 SSL Secure

Richard Mille RM 018 Super Clone : Tourbillon Hommage à Boucheron Steel Skeleton Dial Overview

The Richard Mille RM 018 is the Tourbillon Hommage à Boucheron limited reference, built here as a stainless steel super clone with a skeletonised yellow-accent dial and applied hard-stone hour markers. This super clone follows the RM 018 reference with a 48mm by 39.70mm tonneau case, six polished spline screws, a sapphire caseback, and a black rubber strap with deployant buckle for $1,799. The tonneau geometry, the bridge layout under the skeleton dial, the gemstone markers, and the case finish track the genuine Boucheron edition within tight production tolerance.

Case & Crystal

Tonneau Case, Crown and Lug Profile — 48mm Stainless Steel Build

The Richard Mille RM 018 super clone carries a tonneau case measuring 48mm long by 39.70mm wide and 13mm thick, machined to the curved Richard Mille silhouette that the Hommage à Boucheron reference adopted from the brand's core sports line. The case uses stainless steel for the bezel, caseband, and caseback ring, the same single-material steel construction Richard Mille reserved for select limited editions. Six polished spline screws ring the bezel and tie into the engineered look of the RM 018, and the screw-down crown at 2 o'clock seals the case for water resistance to 50 meters.

Stainless Steel Construction and Surface Finishing

The full stainless steel construction of the RM 018 super clone delivers a hard, corrosion-resistant case that holds its surface across long-term wear. Stainless steel provides the structural rigidity and the weight signature that distinguished this Hommage à Boucheron edition from the brand's lighter titanium production. Polished and brushed finishing across the case sides and the bezel face follows the genuine RM 018 surface map, with hand-applied edge work along the tonneau curves. This super clone follows the steel-on-steel construction so the watch reads correctly under close inspection on weight, surface texture, and edge geometry.

Sapphire Crystal and Sapphire Caseback

Scratch-resistant sapphire crystal with anti-reflective coating covers the skeletonised dial and lets full light through to the open bridges and the applied hard-stone markers below. The curved sapphire follows the tonneau profile and stays clear under angled light, a signature look of the RM 018. The sapphire caseback shows the hand-wound clone movement from below, including the visible mainspring barrel and the gear train, and the screw-down crown supports the 50-meter water resistance of the reference.

Dial & Markers

 Skeletonised Dial with Open Bridges and Yellow Accents

The skeletonised dial of this RM 018 super clone shows the movement bridges, the mainspring barrel, and the gear train from the front, with no traditional dial plate covering the architecture. Yellow accents run across the bridges and the inner chapter ring, which is the signature visual identity that distinguished the Hommage à Boucheron edition from the standard RM 018 production. This super clone matches the bridge cut-out shape, the yellow paint placement, and the open architecture of the genuine Boucheron-edition reference.

Applied Hard-Stone Hour Markers

The RM 018 Tourbillon Hommage à Boucheron carries applied hard-stone hour markers placed around the chapter ring, the gemstone detail that defined the Boucheron collaboration. The genuine 30-piece run used eight stone variants across the production, including jade, lapis lazuli, onyx, sodalite, opal, malachite, turquoise, and obsidian. This super clone uses applied stone-effect markers placed in the original Boucheron layout, paired with the yellow-accent skeletonised bridges and the applied "Richard Mille" branding on the upper bridge. The skeleton hour and minute hands run in skeletonised baton form, matching the open dial language and giving a clear time reading against the open bridges.

Tonneau Layout, Tourbillon-Style Lower Bridge and Legibility

The tonneau case shape extends the dial vertically, which gives the skeletonised display extra real estate for the visible movement architecture. A tourbillon-style escapement bridge sits at the 6 o'clock position under the dial, engineered to resemble the visible tourbillon cage of the genuine RM 018 reference. The skeleton hour and minute hands stay legible against the open bridges through the yellow contrast, and the chapter ring carries the minute track around the outer edge for precise reading.

 

Movement & Specifications

Swiss-Grade RM 018 Clone Hand-Wound Skeleton Movement

The Richard Mille RM 018 super clone runs on a Swiss-grade hand-wound mechanical skeleton movement engineered to match the genuine Richard Mille RM 018 caliber in feel, frequency, and visible architecture. The movement operates at 21,600 vibrations per hour, winds by hand through the crown, and holds a power reserve of approximately 48 hours for two days off the wrist. The caliber drives the central hours and minutes across a satin-finished baseplate and bridges, with a tourbillon-style escapement bridge at 6 o'clock that resembles the cage of the genuine reference. The clone delivers the visible tourbillon appearance of the original RM 018 rather than a working tourbillon escapement, in line with realistic super clone capability at this price tier.

Accuracy, Shock Resistance and Daily Performance

Daily deviation holds within -5 to +8 seconds per day after factory regulation, close to the chronometer band that buyers expect from a Swiss-grade hand-wound build. The skeletonised bridges and the steel case give the movement a strong housing that handles daily wear without shock concern, in line with the desk-to-dinner positioning of the Hommage à Boucheron edition. The 50-meter water resistance and the screw-down crown let the RM 018 super clone hold its seal through daily wear, hand washing, and light water contact.

Spec grid:

TypeHand-wound mechanical, skeleton with tourbillon-style bridge
Frequency21,600 vph (3 Hz)
Power ReserveApproximately 48 hours
BaseplateSatin-finished, skeletonised
BridgesSkeleton bridges with yellow accents
FunctionsHours, minutes, visible escapement display
Strap & Clasp

Black Rubber Strap and Deployant Buckle

The RM 018 super clone carries a black rubber strap, the strap style Richard Mille pairs with the steel-cased editions of the tonneau line. The strap uses a soft, flexible rubber compound that holds its shape across long-term wear, with integrated lugs that flow into the tonneau case for the continuous Richard Mille silhouette. A deployant buckle in matching stainless steel closes flush against the wrist for a secure hold and lets the buyer remove the watch without flexing the strap repeatedly. The RM 018 Tourbillon Hommage à Boucheron uses the black rubber strap on this steel variant and not a metal bracelet.

Wrist Feel, Sizing and Comfort

The watch weighs approximately 140 grams on the full black rubber strap, which gives the RM 018 the substantial wrist presence buyers expect from a stainless steel Richard Mille. The 48mm by 39.70mm tonneau case wears closer to a 42mm round watch on the wrist due to the curved geometry, and the 13mm height clears most shirt cuffs. The RM 018 super clone sits comfortably on wrists from 6.5 to 8 inches with the deployant buckle adjusted across the strap holes.

 

Tonneau Case, Crown and Lug Profile — 48mm Stainless Steel Build

The Richard Mille RM 018 super clone carries a tonneau case measuring 48mm long by 39.70mm wide and 13mm thick, machined to the curved Richard Mille silhouette that the Hommage à Boucheron reference adopted from the brand's core sports line. The case uses stainless steel for the bezel, caseband, and caseback ring, the same single-material steel construction Richard Mille reserved for select limited editions. Six polished spline screws ring the bezel and tie into the engineered look of the RM 018, and the screw-down crown at 2 o'clock seals the case for water resistance to 50 meters.

Stainless Steel Construction and Surface Finishing

The full stainless steel construction of the RM 018 super clone delivers a hard, corrosion-resistant case that holds its surface across long-term wear. Stainless steel provides the structural rigidity and the weight signature that distinguished this Hommage à Boucheron edition from the brand's lighter titanium production. Polished and brushed finishing across the case sides and the bezel face follows the genuine RM 018 surface map, with hand-applied edge work along the tonneau curves. This super clone follows the steel-on-steel construction so the watch reads correctly under close inspection on weight, surface texture, and edge geometry.

Sapphire Crystal and Sapphire Caseback

Scratch-resistant sapphire crystal with anti-reflective coating covers the skeletonised dial and lets full light through to the open bridges and the applied hard-stone markers below. The curved sapphire follows the tonneau profile and stays clear under angled light, a signature look of the RM 018. The sapphire caseback shows the hand-wound clone movement from below, including the visible mainspring barrel and the gear train, and the screw-down crown supports the 50-meter water resistance of the reference.

 Skeletonised Dial with Open Bridges and Yellow Accents

The skeletonised dial of this RM 018 super clone shows the movement bridges, the mainspring barrel, and the gear train from the front, with no traditional dial plate covering the architecture. Yellow accents run across the bridges and the inner chapter ring, which is the signature visual identity that distinguished the Hommage à Boucheron edition from the standard RM 018 production. This super clone matches the bridge cut-out shape, the yellow paint placement, and the open architecture of the genuine Boucheron-edition reference.

Applied Hard-Stone Hour Markers

The RM 018 Tourbillon Hommage à Boucheron carries applied hard-stone hour markers placed around the chapter ring, the gemstone detail that defined the Boucheron collaboration. The genuine 30-piece run used eight stone variants across the production, including jade, lapis lazuli, onyx, sodalite, opal, malachite, turquoise, and obsidian. This super clone uses applied stone-effect markers placed in the original Boucheron layout, paired with the yellow-accent skeletonised bridges and the applied "Richard Mille" branding on the upper bridge. The skeleton hour and minute hands run in skeletonised baton form, matching the open dial language and giving a clear time reading against the open bridges.

Tonneau Layout, Tourbillon-Style Lower Bridge and Legibility

The tonneau case shape extends the dial vertically, which gives the skeletonised display extra real estate for the visible movement architecture. A tourbillon-style escapement bridge sits at the 6 o'clock position under the dial, engineered to resemble the visible tourbillon cage of the genuine RM 018 reference. The skeleton hour and minute hands stay legible against the open bridges through the yellow contrast, and the chapter ring carries the minute track around the outer edge for precise reading.

 

Swiss-Grade RM 018 Clone Hand-Wound Skeleton Movement

The Richard Mille RM 018 super clone runs on a Swiss-grade hand-wound mechanical skeleton movement engineered to match the genuine Richard Mille RM 018 caliber in feel, frequency, and visible architecture. The movement operates at 21,600 vibrations per hour, winds by hand through the crown, and holds a power reserve of approximately 48 hours for two days off the wrist. The caliber drives the central hours and minutes across a satin-finished baseplate and bridges, with a tourbillon-style escapement bridge at 6 o'clock that resembles the cage of the genuine reference. The clone delivers the visible tourbillon appearance of the original RM 018 rather than a working tourbillon escapement, in line with realistic super clone capability at this price tier.

Accuracy, Shock Resistance and Daily Performance

Daily deviation holds within -5 to +8 seconds per day after factory regulation, close to the chronometer band that buyers expect from a Swiss-grade hand-wound build. The skeletonised bridges and the steel case give the movement a strong housing that handles daily wear without shock concern, in line with the desk-to-dinner positioning of the Hommage à Boucheron edition. The 50-meter water resistance and the screw-down crown let the RM 018 super clone hold its seal through daily wear, hand washing, and light water contact.

Spec grid:

TypeHand-wound mechanical, skeleton with tourbillon-style bridge
Frequency21,600 vph (3 Hz)
Power ReserveApproximately 48 hours
BaseplateSatin-finished, skeletonised
BridgesSkeleton bridges with yellow accents
FunctionsHours, minutes, visible escapement display

Black Rubber Strap and Deployant Buckle

The RM 018 super clone carries a black rubber strap, the strap style Richard Mille pairs with the steel-cased editions of the tonneau line. The strap uses a soft, flexible rubber compound that holds its shape across long-term wear, with integrated lugs that flow into the tonneau case for the continuous Richard Mille silhouette. A deployant buckle in matching stainless steel closes flush against the wrist for a secure hold and lets the buyer remove the watch without flexing the strap repeatedly. The RM 018 Tourbillon Hommage à Boucheron uses the black rubber strap on this steel variant and not a metal bracelet.

Wrist Feel, Sizing and Comfort

The watch weighs approximately 140 grams on the full black rubber strap, which gives the RM 018 the substantial wrist presence buyers expect from a stainless steel Richard Mille. The 48mm by 39.70mm tonneau case wears closer to a 42mm round watch on the wrist due to the curved geometry, and the 13mm height clears most shirt cuffs. The RM 018 super clone sits comfortably on wrists from 6.5 to 8 inches with the deployant buckle adjusted across the strap holes.

 

Case & Crystal

Tonneau Case, Crown and Lug Profile — 48mm Stainless Steel Build

The Richard Mille RM 018 super clone carries a tonneau case measuring 48mm long by 39.70mm wide and 13mm thick, machined to the curved Richard Mille silhouette that the Hommage à Boucheron reference adopted from the brand's core sports line. The case uses stainless steel for the bezel, caseband, and caseback ring, the same single-material steel construction Richard Mille reserved for select limited editions. Six polished spline screws ring the bezel and tie into the engineered look of the RM 018, and the screw-down crown at 2 o'clock seals the case for water resistance to 50 meters.

Stainless Steel Construction and Surface Finishing

The full stainless steel construction of the RM 018 super clone delivers a hard, corrosion-resistant case that holds its surface across long-term wear. Stainless steel provides the structural rigidity and the weight signature that distinguished this Hommage à Boucheron edition from the brand's lighter titanium production. Polished and brushed finishing across the case sides and the bezel face follows the genuine RM 018 surface map, with hand-applied edge work along the tonneau curves. This super clone follows the steel-on-steel construction so the watch reads correctly under close inspection on weight, surface texture, and edge geometry.

Sapphire Crystal and Sapphire Caseback

Scratch-resistant sapphire crystal with anti-reflective coating covers the skeletonised dial and lets full light through to the open bridges and the applied hard-stone markers below. The curved sapphire follows the tonneau profile and stays clear under angled light, a signature look of the RM 018. The sapphire caseback shows the hand-wound clone movement from below, including the visible mainspring barrel and the gear train, and the screw-down crown supports the 50-meter water resistance of the reference.

Dial & Markers

 Skeletonised Dial with Open Bridges and Yellow Accents

The skeletonised dial of this RM 018 super clone shows the movement bridges, the mainspring barrel, and the gear train from the front, with no traditional dial plate covering the architecture. Yellow accents run across the bridges and the inner chapter ring, which is the signature visual identity that distinguished the Hommage à Boucheron edition from the standard RM 018 production. This super clone matches the bridge cut-out shape, the yellow paint placement, and the open architecture of the genuine Boucheron-edition reference.

Applied Hard-Stone Hour Markers

The RM 018 Tourbillon Hommage à Boucheron carries applied hard-stone hour markers placed around the chapter ring, the gemstone detail that defined the Boucheron collaboration. The genuine 30-piece run used eight stone variants across the production, including jade, lapis lazuli, onyx, sodalite, opal, malachite, turquoise, and obsidian. This super clone uses applied stone-effect markers placed in the original Boucheron layout, paired with the yellow-accent skeletonised bridges and the applied "Richard Mille" branding on the upper bridge. The skeleton hour and minute hands run in skeletonised baton form, matching the open dial language and giving a clear time reading against the open bridges.

Tonneau Layout, Tourbillon-Style Lower Bridge and Legibility

The tonneau case shape extends the dial vertically, which gives the skeletonised display extra real estate for the visible movement architecture. A tourbillon-style escapement bridge sits at the 6 o'clock position under the dial, engineered to resemble the visible tourbillon cage of the genuine RM 018 reference. The skeleton hour and minute hands stay legible against the open bridges through the yellow contrast, and the chapter ring carries the minute track around the outer edge for precise reading.

 

Movement & Specifications

Swiss-Grade RM 018 Clone Hand-Wound Skeleton Movement

The Richard Mille RM 018 super clone runs on a Swiss-grade hand-wound mechanical skeleton movement engineered to match the genuine Richard Mille RM 018 caliber in feel, frequency, and visible architecture. The movement operates at 21,600 vibrations per hour, winds by hand through the crown, and holds a power reserve of approximately 48 hours for two days off the wrist. The caliber drives the central hours and minutes across a satin-finished baseplate and bridges, with a tourbillon-style escapement bridge at 6 o'clock that resembles the cage of the genuine reference. The clone delivers the visible tourbillon appearance of the original RM 018 rather than a working tourbillon escapement, in line with realistic super clone capability at this price tier.

Accuracy, Shock Resistance and Daily Performance

Daily deviation holds within -5 to +8 seconds per day after factory regulation, close to the chronometer band that buyers expect from a Swiss-grade hand-wound build. The skeletonised bridges and the steel case give the movement a strong housing that handles daily wear without shock concern, in line with the desk-to-dinner positioning of the Hommage à Boucheron edition. The 50-meter water resistance and the screw-down crown let the RM 018 super clone hold its seal through daily wear, hand washing, and light water contact.

Spec grid:

TypeHand-wound mechanical, skeleton with tourbillon-style bridge
Frequency21,600 vph (3 Hz)
Power ReserveApproximately 48 hours
BaseplateSatin-finished, skeletonised
BridgesSkeleton bridges with yellow accents
FunctionsHours, minutes, visible escapement display
Strap & Clasp

Black Rubber Strap and Deployant Buckle

The RM 018 super clone carries a black rubber strap, the strap style Richard Mille pairs with the steel-cased editions of the tonneau line. The strap uses a soft, flexible rubber compound that holds its shape across long-term wear, with integrated lugs that flow into the tonneau case for the continuous Richard Mille silhouette. A deployant buckle in matching stainless steel closes flush against the wrist for a secure hold and lets the buyer remove the watch without flexing the strap repeatedly. The RM 018 Tourbillon Hommage à Boucheron uses the black rubber strap on this steel variant and not a metal bracelet.

Wrist Feel, Sizing and Comfort

The watch weighs approximately 140 grams on the full black rubber strap, which gives the RM 018 the substantial wrist presence buyers expect from a stainless steel Richard Mille. The 48mm by 39.70mm tonneau case wears closer to a 42mm round watch on the wrist due to the curved geometry, and the 13mm height clears most shirt cuffs. The RM 018 super clone sits comfortably on wrists from 6.5 to 8 inches with the deployant buckle adjusted across the strap holes.

 

Heritage, Comparison and Ownership Details

This section covers the lineage, cross-reference decisions, QC process, and post-purchase logistics for the Richard Mille RM 018 Super Clone : Tourbillon Hommage à Boucheron Steel Skeleton Dial.
RM 018 Hommage à Boucheron vs RM 018 Original vs RM 011 Which Richard Mille Skeleton to Buy

The Richard Mille tonneau line offers several skeleton references across material and signature collaboration, and the RM 018 Hommage à Boucheron holds the most distinctive jewellery-meets-watchmaking identity. The comparison of three Richard Mille references is listed below.

Variant Case Material Movement Signature Super Clone Price
RM 018 Tourbillon Hommage à Boucheron (this reference) Stainless steel RM 018 clone hand-wound skeleton Boucheron jeweller edition $1,799
RM 018 Original Tourbillon Titanium or 18k gold RM 018 clone hand-wound skeleton Richard Mille core line $1,899
RM 011 Felipe Massa Flyback Chronograph Titanium or steel RM 011 clone automatic flyback Felipe Massa motorsport $1,899

Buyers select the RM 018 Hommage à Boucheron for the steel case, the yellow-accent skeleton bridges, and the applied hard-stone markers that the 30-piece Boucheron run defined. The standard RM 018 buyer prefers the titanium or gold case and the more uniform Richard Mille colour palette. The RM 011 buyer chooses the flyback chronograph complication and the motorsport Felipe Massa signature. The RM 018 Tourbillon Hommage à Boucheron Super Clone gives the limited-edition wrist presence of the Boucheron collaboration with the steel case and the visible tourbillon-style bridge at a fraction of the original-market price.

Heritage Richard Mille, Boucheron and the RM 018 Collaboration

Richard Mille launched the Richard Mille brand in 2001 with the RM 001, the first tonneau-shaped sports watch built around a visible tourbillon and an exposed skeleton architecture. The maison positioned every reference as a "racing machine for the wrist" and reserved limited runs for high-profile collaborations across sport and jewellery. Richard Mille partnered with Boucheron in 2011 for the RM 018 Tourbillon Hommage à Boucheron, a 30-piece limited edition that paid tribute to the French jeweller founded by Frédéric Boucheron on the Place Vendôme in 1858. The collaboration used a hand-wound skeleton tourbillon caliber paired with applied hard-stone hour markers in eight gemstone variants, including jade, lapis lazuli, onyx, sodalite, opal, malachite, turquoise, and obsidian. The RM 018 Tourbillon Hommage à Boucheron Super Clone carries that jeweller collaboration heritage and the proven Richard Mille tonneau architecture onto the wrist at a fraction of the original-market price.

Authenticity of Build, 4-Stage QC and What's in the Box

Every Richard Mille RM 018 super clone passes a four-stage quality control sequence before shipping. The 4 QC steps are listed below.

  • Alignment check: Bridge placement, hard-stone marker position, yellow accent paint, and "Richard Mille" branding alignment verified against genuine reference photos.
  • Movement testing: Hand winding, hand setting, and 21,600-vph frequency confirmed on a timegrapher.
  • Finishing inspection: Stainless steel surface finish, spline screw alignment, applied gemstone marker seating, and sapphire clarity reviewed under magnification.
  • Performance validation: Power reserve, accuracy, crown seal, and water-resistance pressure tested.

The RM 018 Hommage à Boucheron Super Clone ships in secure, discreet packaging to protect your privacy. The full package contents are listed below.

  1. Watch:  Richard Mille RM 018 super clone
  2. Presentation box:  Richard Mille-style box set
  3. Travel pouch:  outer protective pouch
  4. Booklet:  owner's manual
  5. Warranty card:  warranty card
  6. Extras:  polishing cloth and 1 spare strap tool
Shipping, Warranty and Aftercare

The Richard Mille RM 018 super clone ships within 24 hours of order confirmation via DHL Express or FedEx Priority with full insurance and discreet packaging. Worldwide delivery lands in 5 to 10 business days across the USA, UK, UAE, India, and Europe. Every watch carries a 1-year limited warranty covering movement defects, with replacement-parts support and servicing guidance provided after purchase. The 4 support channels for the RM 018 Super Clone are listed below.

  • WhatsApp: Pre-sale consultation and post-sale assistance
  • Email: Support with a 24-hour response window through sales@superclonewatches.com
  • Live chat: Available on superclonewatches.com during business hours
  • Parts: Replacement parts sourcing through the originating factory

Related Richard Mille RM 018 Super Clone : Tourbillon Hommage à Boucheron Steel Skeleton Dial Super Clones

Richard Mille Super Clone RM11-03 Yellow Storm

Richard Mille Super Clone RM11-03 Yellow Storm

$1,799.00
Rolex Datejust 41 126300 Super Clone: Steel Blue Dial 41mm

Rolex Datejust 41 126300 Super Clone: Steel Blue Dial 41mm

Original price was: $8,100.00.Current price is: $1,299.00.
Richard Mille Super Clone Titanium Black/White

Richard Mille Super Clone Titanium Black/White

$1,799.00
Richard Mille Super Clone Le Mans

Richard Mille Super Clone Le Mans

$1,799.00

Verified Customer Reviews

Real owners of the Richard Mille RM 018 super clone share the wrist-side verdict. Ratings average 4.9 / 5 across 128 verified orders.

★★★★★

The hard-stone markers and yellow bridges look exactly right

"I followed the original Boucheron 30-piece release in 2011 and never came close to owning one. This super clone has the applied stone-effect markers in the correct chapter-ring position, the yellow accents on the skeleton bridges, and the steel tonneau case with the six spline screws spaced correctly. At $1,799 it gives me the Hommage à Boucheron identity without a six-figure budget."
DR Daniel R · Verified buyer · London
★★★★★

Stainless steel weight makes this feel like a real Richard Mille

"Shipped DHL and reached Dubai in 6 days. The packaging was discreet exactly as described. The full steel case gives the RM 018 a serious 140-gram wrist presence that lighter titanium clones never achieve. The hand-winding action feels smooth and the tourbillon-style bridge at 6 o'clock has the correct cage profile under the sapphire."
KA Khalid A · Verified buyer · Dubai
★★★★★

First Richard Mille and the WhatsApp support sealed it

"I asked about the difference between this Boucheron edition and the standard RM 018 over WhatsApp before paying. The answers were specific on the steel case, the yellow bridges, the hard-stone markers, and the skeleton movement architecture. The watch arrived in a full box set with the booklet and warranty card. The skeleton dial and the black rubber strap pop on the wrist."
AS Arjun S · Verified buyer · Mumbai
FAQ

Frequently Asked Questions

Every question below is answered with direct context covering super clone basics, quality, choosing the right reference, and orders & support.

Is the Richard Mille RM 018 Tourbillon Hommage à Boucheron a 1:1 super clone?+

Yes, the Richard Mille RM 018 Tourbillon Hommage à Boucheron sold on Super Clone Watches is a 1:1 super clone that matches the genuine Boucheron limited edition at 98% visual and dimensional accuracy. The build matches the stainless steel tonneau case, the six polished spline screws, the skeletonised dial with yellow accents, the applied hard-stone hour markers, the tourbillon-style escapement bridge at 6 o'clock, and the black rubber strap geometry within tight tolerance. The price of $1,799 compares to a genuine market figure above $400,000 for the 30-piece run.

Does the RM 018 super clone use a working tourbillon?+

No, the RM 018 super clone does not use a working tourbillon escapement. The watch carries a Swiss-grade hand-wound mechanical skeleton movement engineered to resemble the visible tourbillon architecture of the genuine RM 018 caliber, with a tourbillon-style bridge at the 6 o'clock position under the sapphire. The clone delivers the visual identity and the skeleton bridge layout of the original reference at a $1,799 price point, in line with realistic super clone capability at this tier.

When did Richard Mille release the RM 018 Tourbillon Hommage à Boucheron?+

Richard Mille released the RM 018 Tourbillon Hommage à Boucheron in 2011 as a 30-piece limited edition collaboration with the French jeweller Boucheron. The reference paid tribute to Boucheron's foundation by Frédéric Boucheron on the Place Vendôme in 1858, and the production used eight different hard-stone variants for the applied hour markers across the run. This super clone follows the steel-cased version of the production layout.

What hard-stone markers did the original Boucheron edition use?+

The original Boucheron edition used 8 hard-stone variants for the applied hour markers across the 30-piece production. The 8 stones used in the genuine run are listed below.

  • Jade: Green hard-stone variant
  • Lapis lazuli: Deep blue hard-stone variant
  • Onyx: Black hard-stone variant
  • Sodalite: Royal blue hard-stone variant
  • Opal: Iridescent hard-stone variant
  • Malachite: Banded green hard-stone variant
  • Turquoise: Blue-green hard-stone variant
  • Obsidian: Black volcanic glass variant

This super clone uses applied stone-effect markers placed in the original Boucheron layout to match the visual signature of the genuine reference.

How water resistant is the RM 018?+

The Richard Mille RM 018 holds water resistance to 50 meters, which covers daily wear, hand washing, and light splash contact. The stainless steel case, the screw-down crown at 2 o'clock, and the sealed caseback hold the watch against everyday water contact. This super clone passes a water-resistance pressure test during quality control to confirm the seal before shipping.

How is the watch shipped internationally?+

The Richard Mille RM 018 super clone ships via DHL Express or FedEx Priority with full insurance and tracked, signature-required delivery. The watch travels in secure, discreet packaging to protect your privacy. Transit time runs 5 to 10 business days to the USA, UK, UAE, India, and Europe, and the shipping cost is included in the price.

What is the difference between the RM 018 Hommage à Boucheron and the standard RM 018?+

The difference between the RM 018 Hommage à Boucheron and the standard RM 018 is the case material, the dial palette, and the limited-edition status, not the underlying caliber. The Boucheron edition uses a stainless steel tonneau case with yellow-accent skeleton bridges and applied hard-stone hour markers across a 30-piece run, while the standard RM 018 uses titanium or 18k gold cases with the brand's standard colour palette across regular production. Both versions share the 48mm by 39.70mm tonneau geometry and the hand-wound skeleton tourbillon caliber.

What warranty is included with the RM 018 super clone?+

A 1-year limited warranty covers movement defects and manufacturing faults on this RM 018 super clone. Replacement parts sourcing runs through the originating factory via Super Clone Watches support. Movement servicing guidance is provided through WhatsApp and email through sales@superclonewatches.com for the lifetime of the watch.